3M™ Tape Primer 94 can be used to promote adhesion of 3M tapes to surfaces such as polyethylene, polypropylene, and ABS plastics. If you are using an M&M Performance Super Tuff or Aero Tuff body, using 3M™ Tape Primer 94 can be used to promote the adhesion of graphics to this body. You must prepare the surface of the body with Glass Cleaner and Denatured Alcohol before applying two coats of 3M™ Tape Primer 94 before applying your graphics. Once the graphics are applied you will then use the Denatured Alcohol to remove the excess tape primer.
*Please Note: If you are purchasing graphics for your M&M PolyPropylene body, GKG now prints our graphics on Oracal Orajet 3105 High Tack Vinyl that has an aggressive adhesive that is designed to adhere to these bodies without the use of this Primer. Just be sure to make note of what body type you have when purchasing numbers, graphics, names etc. This will save you the cost of the Primer. If you have graphics from another shop then you can order the primer for those.
**ATTENTION: THIS PRODUCT CAN ONLY BE SHIPPED VIA UPS GROUND
